Индуктивни датчици RJ10-N NAMUR 2 ( дву ) проводен, тип пръстен

Производител: Pepperl+Fuchs GmbH - Germany

Inductive Proximity Ring Type Sensors - 10mm Sensing Range

P+F ring type inductive proximity sensors have an electromagnetic field concentrated inside the ring. The sensor is activated when a metal target enters the ring. The target should be as large or larger than the target specified with each model.

Bi-stable ring sensors provide latching outputs. The outputs latch as a target passes through the ring and do not unlatch until the target passes through the sensor in the opposite direction.

The RC10-14-N3 and RC15-14-N3 can be used with any P+F switch isolator.

Note: Output state is determined at controlling device or P+F amplifier

MOUNTING GUIDELINES

These guidelines apply to all inductive ring sensors, regardless of output. The following diagram depicts a ring sensor flush-mounted on a steel plate. The given diameter allowances for the  cutout in the steel plate are required for optimal sensor performance.

 Ring proximity switches

Ring style proximity switches are fitted with a coil so that the switch is activated as soon as a metallic object is found inside the circumference of the ring.

Typical applications include the detection and counting of small metal parts, which are passed through the ring proximity sensor. Both ferrous (FE) and nonferrous (NFE) metals will be detected.