Amphenol 57-30360 92 16 КУПЛУНГ ЗА ПРИНТЕР CENTRONICS 36PIN МЪЖКИ ЪГЛОВИ

Pin Assignment for (Parallel Port) Centronics Printer Connector (TTL Logic)
(Amphenol 57-30360). IN: computer->printer,  OUT: printer->computer
---------------------------------------------------------------------------
 1    /STROBE IN  Normal=High, Data read-in when Low for at least 0.5f, pair
 2    DATA 0  IN  (Pair with pin 20) Least significant Bit
 3    DATA 1  IN  (Pair with pin 21)
 4    DATA 2  IN  (Pair with pin 22)
 5    DATA 3  IN  (Pair with pin 23)
 6    DATA 4  IN  (Pair with pin 24)
 7    DATA 5  IN  (Pair with pin 25)
 8    DATA 6  IN  (Pair with pin 26)
 9    DATA 7  IN  (Pair with pin 27), Most significant Bit
10    /ACK    OUT w0,5fs pulse, low=data received and printer ready, pair 28
11    BUSY    OUT High: printer is busy, cannot accept data, pair with pin 2
12    PE      OUT High=printer out of paper (older printers: GND)
13    SELECT  OUT High:printer is in the selected state (On-Line) (old: N/C)
14    /AF     IN  low=paper fed 1 line after printing, not always used/old:
D
15    N/C     --  older printers: GND
16    GND     --  Logic Ground Level (Signal Ground)
17    GND     --  Chassis Ground
18    +5V     --  Printer's +5V DC 80mA max., not always used
19-30 GND     --  Signal Ground
31    /INIT   IN  Normal=High, Low for w0,5fs=printer RESET, buffer cleared,
i
32    /ERROR  OUT Low=Paper End State, Off-Line State, or Error State, pair
33    GND     --  Signal Ground, sometimes External Ground
34    N/C     --  (older printers: CLK, pair with pin 33)
35    +5V     +5V DC through a 4.7Kj resistor, not always used, sometimes: T
T
36    /SLCTIN IN  Low=Data Entry Possible, High=Printer Off-Line, older prin
rs